• Publications
  • Influence
ABSORPTION COEFFICIENT AND OPTIMIZATION OF THREE- APERTURE MPPA PARALLEL WITH DIFFERENT DIVIDE CAVITIES
A three-aperture MPPA parallel with different divide cavities has been proposed in this work. The theoretical prediction model of sound absorption is established by the Maa’s theory andExpand
Application of Spiral Coal Powder Burners
Presents the significant progress made in the development of spiral coal powder burners for power station boilers in recent years, and since the import of large capacity boilers in particular for theExpand
Study on Mechanical Properties of the M40/5228 Composites
The mechanical properties of M40/5228 composites were investigated under the several conditions The interface of the composites was characterized by SEM Compared with M40/4211 composites, M40/5228Expand
Preparation of Monodisperse Superfine PMMA Particles by Microwave Emulsifier-Free Polymerization
Emulsifierfree emulsion polymerization of MMA was carried out using microwave irradiation. Superfine and monodisperse PMMA microparticles were obtained. Microwave irradiation could notably promoteExpand
On the input output method in valuating regional economic development
Based on the defined economic indexes for and the concrete conditions of regional economic development,the author introduces the input output method and deduces some relative quantitative analysisExpand
Effect of Carbon Fiber on the Adhesion Property between the Fiber and Matrix Resin in E-beam Cured Composites
The characteristics of electron beam curing technique are rapid, effective and low cost It is found that the adhesion between carbon fibers and matrix of electron beam cured composite was lower thanExpand
Recent Advances in Electron-beam Cured Composites
A review with the resins matrix of electron beam cured composites,the advantage of electron beam curing process,the issue in this process and the situations of this material at home and abroad.
Development of electronically controlled system for diesel engines with common rail fuel injection
The hardware system is composed of a 16-bit chip of 80C196KB and an 8-bit chip of AT89C52. The former is a main processor,the main tasks of which include the conversion of input analogousExpand
Properties of M40J/EB99-1 Composites Cured by Electron Beam
The normal mechanical properties of M40J/EB991 composites cured by electron beam (EB) were investigated, including tensile properties, compression properties, short beam shear strength and flexuralExpand