• Publications
  • Influence
Determination of mixed mode cohesive laws
A novel approach is proposed for the determination of mixed mode cohesive laws for large scale crack bridging problems. The approach is based on a plane, two-dimensional analysis utilizing the JExpand
  • 108
  • 9
Determination of cohesive laws by the J integral approach
Abstract The determination of cohesive laws for describing large scale failure process zones is discussed. Firstly, a general approach for determination of cohesive laws, by the measurement of the JExpand
  • 241
  • 7
Damage evolution under cyclic multiaxial stress state: A comparative analysis between glass/epoxy laminates and tubes
Abstract In this work an experimental investigation on damage initiation and evolution in laminates under cyclic loading is presented. The stacking sequence [0/θ2/0/−θ2]s has been adopted in order toExpand
  • 67
  • 7
Improved design of large wind turbine blade of fibre composites based on studies of scale effects (Phase 1) - Summary Report
Materials Research Department, Riso National Laboratory, 4000 Roskilde, Denmark *Wind Energy Department, Riso National Laboratory, 4000 Roskilde, Denmark Department of Solid Mechanics, The TechnicalExpand
  • 101
  • 6
  • PDF
DCB-specimen loaded with uneven bending moments
A double cantilever beam specimen loaded with uneven bending moments (DCB-UBM) is proposed for mixed mode fracture mechanics characterisation of adhesive joints, laminates and multilayers. A linearExpand
  • 160
  • 6
Neoadjuvant Chemotherapy with Cisplatin and Methotrexate in Patients with Muscle-Invasive Bladder Tumours
This prospective, randomized study based on two associated trials was designed to evaluate the effect of neoadjuvant chemotherapy with cisplatin and methotrexate with folinic acid rescue or noExpand
  • 67
  • 4
Fundamentals for remote structural health monitoring of wind turbine blades - a preproject
TLDR
This summary-report describes the results of a pre-project that has the aim of establishing the basic technical knowledge to evaluate whether remote surveillance of the rotor blades of large off-shore wind turbines has technical and economical potential. Expand
  • 130
  • 4
  • PDF
Constitutive behaviour of mixed mode loaded adhesive layer
Mixed mode testing of adhesive layer is performed with the Mixed mode double Cantilever Beam specimen. During the experiments, the specimens are loaded by transversal and/or shear forces; sevenExpand
  • 118
  • 4
Characterizing delamination of fibre composites by mixed mode cohesive laws
A novel method is used for the determination of mixed mode cohesive laws and bridging laws for the characterisation of crack bridging in composites. The approach is based on an application of the JExpand
  • 100
  • 4
Controlled crack growth in ceramics: The DCB specimen loaded with pure moments
Abstract The energy release rate of a double cantilever beam (DCB) loaded with pure bending moments is independent of crack length, allowing stable crack growth in even truly brittle materials. TheExpand
  • 40
  • 3