• Publications
  • Influence
Adhesion characteristics of copper thin film deposited on PET substrate by electron cyclotron resonance-metal organic chemical vapor deposition
Abstract The adhesion characteristics of Cu/C:H films on the pretreated PET (polyethylene terephthalate) substrate prepared by ECR–MOCVD with a periodic DC bias system were investigated in the aspectExpand
  • 14
  • 1
High thermal performance of SnO2:F thin transparent heaters with scattered metal nanodots.
Facile production and novel transparent heaters consisting of fluorine-doped tin oxide (SnO2:F or FTO) thin films covered with three different scattered metal nanodots (Cr-nd, NiCr-nd and Ni-nd)Expand
  • 34
Plasma-polymerized C60 as a functionalized coating layer on fluorine-doped tin oxides for anode materials of lithium-ion batteries
Abstract A unique polymerized C 60 thin film was functionalized by radio frequency – plasma-assisted thermal evaporation as a passivation layer for the fluorine-doped tin oxide (SnO 2 :F) anode of aExpand
  • 17
Electrochemical characteristics of porous TiO2 encapsulated silicon anode
Abstract TiO 2 coated silicon, which was prepared by the modified sol–gel method, was employed as the anode material for lithium secondary batteries and the relationship between the diffusivity andExpand
  • 13
Electrochemical characteristics of nc-Si/SiC composite for anode electrode of lithium ion batteries
nc-Si/SiC composite particles were prepared as an anode material for lithium ion batteries using a plasma jet with DC arc discharge. The composition of the nc-Si/SiC composite particles wasExpand
  • 21
Employment of SnO2:F@Ni3Sn2/Ni nanoclusters composites as an anode material for lithium-ion batteries
Abstract Surface modification of SnO 2 :F particles which obtained from a large-scale electron cyclotron resonance-metal organic chemical vapor deposition system was carried out by two consecutiveExpand
  • 4
Pilot-scale electron cyclotron resonance-metal organic chemical vapor deposition system for the preparation of large-area fluorine-doped SnO2 thin films
The authors report the surface morphology, optical, electrical, thermal and humidity impacts, and electromagnetic interference properties of fluorine-doped tin oxide (SnO2:F or “FTO”) thin films on aExpand
  • 3
Effect of Hydrogen Content on Characteristics of Cu/C: H Films Coated on Polyethylene Terephthalate Substrate Prepared by ECR-MOCVD Coupled with a Periodic DC Bias
Cu/C:H films were prepared on the PET (polyethylene terephthalate) substrate under room temperature by ECR (electron-cyclotron-resonance) chemical vapor deposition coupled with a (-)DC bias system.Expand
  • 5
Electrochemical characteristics of fluorine-doped tin oxide film coated on stainless steel bipolar plates
Abstract In order to improve the interfacial contact resistance (ICR) and corrosion resistance of STS316 bipolar plates of PEMFCs, after surface pretreatment at mild plasma condition, theExpand
  • 9
...
1
2
3
4
...