• Publications
  • Influence
Pyrolysis of scrap tyres
Abstract Cross-section samples (2–3 cm wide), representative of a whole car tyre, have been pyrolysed under nitrogen in a 3.5 dm3 autoclave at 300°C, 400°C, 500°C, 600°C and 700°C. The whole solid,Expand
Characterization of the liquid products obtained in tyre pyrolysis
Cross-section samples (2–3 cm wide), representative of a whole car tyre, have been pyrolysed under nitrogen in a 3.5 dm3 autoclave at 300, 400, 500, 600 and 700 °C. Over 500 °C there is no effect ofExpand
Chromatographic analysis of the gases obtained in tyre pyrolysis
Representative samples of a whole car tyre have been pyrolysed under nitrogen in a 3.5 dm3 autoclave at 400, 500, 600 and 700°C. The whole gas generated during each pyrolysis run was collected inExpand
Influence of time and temperature on pyrolysis of plastic wastes in a semi-batch reactor
Abstract The objective of this work is the study of the influence of temperature and time in the products obtained in the pyrolysis of plastic wastes. The thermal behaviour of a mixture, whichExpand
Catalytic pyrolysis of plastic wastes with two different types of catalysts: ZSM-5 zeolite and Red Mud
Abstract The influence of ZSM-5 zeolite and Red Mud in the pyrolysis of plastic wastes has been studied. Both catalysts have been thoroughly characterized; the zeolite shows weak and strong acidExpand
Pyrolysis of electrical and electronic wastes
Abstract A preliminary study of the possibilities of pyrolysis for recovering wastes of electrical and electronic equipments (WEEE) has been carried out. Four type of samples coming from real WEEEsExpand
Deactivation and regeneration of ZSM-5 zeolite in catalytic pyrolysis of plastic wastes.
In this work, a study of the regeneration and reuse of ZSM-5 zeolite in the pyrolysis of a plastic mixture has been carried out in a semi-batch reactor at 440°C. The results have been compared withExpand
Dechlorination of fuels in pyrolysis of PVC containing plastic wastes
Abstract The objective of this work is the study of several dechlorination methods devoted to reduce the chlorine content of the liquids obtained in pyrolysis of PVC containing plastic wastes. AExpand
Pyrolysis of plastic packaging waste: A comparison of plastic residuals from material recovery facilities with simulated plastic waste.
Pyrolysis may be an alternative for the reclamation of rejected streams of waste from sorting plants where packing and packaging plastic waste is separated and classified. These rejected streamsExpand
Catalytic stepwise pyrolysis of packaging plastic waste
Abstract In this paper the combination of catalytic and stepwise pyrolysis is explored. A mixture of polyethylene (PE), polypropylene (PP), polystyrene (PS), poly(ethylene terephthalate) (PET) andExpand
...
1
2
3
4
5
...