Adenise Lorenci Woiciechowski

  • Citations Per Year
Learn More
Industrial and environmental biotechnology are going to new paths, resulting in processes with "clean technologies", with the maximum production and the less residues. Technologies of remediation and bioremediation are continuously being improved using genetically modified microorganisms or those naturally occurring, to clean residues and contaminated areas(More)
The oil palm empty fruit bunches (EFB) are an attractive source of carbon for the production of biochemical products, therefore, the aim of this work is to analyze the effect of the steam explosion (SE) pretreatment under autocatalytic conditions on EFB using a full experimental design. Temperature and reaction time were the operational variables studied.(More)
Fermentation parameters for phytase production in column-type bioreactor were monitored using a new data acquisition system. There are a number of studies reporting phytase production in flasks, but a lack of data about microorganism respiration behaviour during phytase production using column bioreactor. The objectives of this work were the monitoration of(More)
In this study, the potential use of Pichia fermentans YC5.2 as a starter culture to conduct controlled coffee bean fermentations during on-farm wet processing was investigated. Inoculated fermentations were conducted with or without the addition of 2% (w/v) sucrose, and the resultant microbial growth and metabolism, bean chemistry and beverage quality were(More)
Cassava bagasse was hydrolyzed using HCl and the hydrolysate was used for the production of xanthan gum using a bacterial culture of Xanthomonas campestris. Cassava bagasse hydrolysate with an initial concentration of approx 20 g of glucose/L proved to be the best substrate concentration for xanthan gum production. Among the organic and inorganic nitrogen(More)
Lignin is an important raw material for the sustainable biorefineries and also the forerunner of high-value added products, such as biocomposite for chemical, pharmaceutical and cement industries. Oil palm empty fruit bunches (OPEFB) were used for lignin preparation by successive treatment with 1% (w/w) H2SO4 at 121°C for 60 min and 2.5% NaOH at 121°C for(More)
A novel low-cost medium was developed from by-products and wastes from the ethanol agro-industry to replace commercial media in the production of a steam sterilization biological indicator (BI). Various recovery media were developed using soybean or sugarcane molasses and vinasse to prepare a self-contained BI. Media performance was evaluated by viability(More)
Soybeans (Glycine max) are an abundant source of proteins that have been recognized for their high nutritional value and bioactive properties. Soybeans are legumes, and possess high protein content (approximately 40%) as compared to most other legumes (Aguirre et al., 2008; Yimit et al., 2012). The health benefits of soybeans are attributed to the presence(More)
The objective of this work is to verifying the consume of the minerals K, Na, Fe, Mg, P, S-SO4 (-2), B, N Total Kjedahl (NTK), NO3 (-)-N, and NH4 (+)-N in the production of bacterial cellulose by Acetobacter xylinum, according to the medium and the manner of cultivation. The fermentative process was in ripe and green coconut water. K and Na were determined(More)
Six Lactobacillus strains were analyzed to select a bacterium for conversion of brewers' spent grain (BSG) into lactic acid. Among the investigated strains, L. acidophilus ATCC 43121 showed the highest yield of lactic acid production (16.1 g/L after 48 hours) when grown in a synthetic medium. It was then analyzed for its ability to grow on the hydrolysates(More)