Abdelrani Yaacoubi

Learn More
Batch adsorption of the chromium(VI) onto Moroccan stevensite pillared by Keggin aluminium hydroxypolycation (Al-stevensite) and cationic surfactant cetyltrimethylammoniumbromide (CTA-stevensite) was investigated. The results showed that the CTA-stevensite has a higher affinity than that of Al-stevensite for chromium(VI) adsorption. The adsorption(More)
In this study, Moroccan crude clay of Safi, which was characterized by X-ray diffraction, is used as adsorbent for the investigation of the adsorption kinetics, isotherms and thermodynamic parameters of the Basic Red 46 (BR46) in aqueous solutions at various dye concentrations, adsorbent masses and pH values. The results showed that the adsorption capacity(More)
The objective of the present study was to investigate the adsorption of the heavy metals mercury(II) and chromium(VI), from aqueous solutions, onto Moroccan stevensite. A mineralogical and physicochemical characterization of natural stevensite was carried out. In order to improve the adsorption capacity of stevensite for Cr(VI), a preparation of stevensite(More)
The physicochemical treatment of wastewater is of substantial interest, especially when conventional treatments by biological processes are not amenable. Among the current chemical processes used for industrial wastewater treatment, coagulation-flocculation has received a large attention for high pollutant removal efficiency. This paper summarizes the(More)
The coagulant iron chloride and the flocculants Polysep 3000 (PO), Superfloc A-1820 (SU) and Praestol 2515 TR (PR) have been used in this study to show the efficiency of coagulation flocculation process in the chemical precipitation method for the removal of organic and colouring matters from the paint industry wastewater. This study also includes the(More)
The aim of this paper is to study the adsorption of the heavy metals (Cd(II), Cu(II), Mn(II), Pb(II), and Zn(II)) from aqueous solutions by a natural Moroccan stevensite called locally rhassoul. We carried out, first, a mineralogical and physicochemical characterization of stevensite. The surface area is 134 m2/g and the cation exchange capacity (CEC) is(More)
Photocatalysis on supported TiO2 was combined with aerobic biological treatment in a sequential batch reactor to compare the degradation of two textile dyes: a blue azo dye (DR KBL CDG) and a green phthalocyanine dye (DR K4GN). Three reactors were run in parallel. SBR1 was used as a reference and was fed with urban wastewater only. SBR2 and SBR3 were fed(More)
The degradation under UV, visible and sunlight irradiation of C.I. Basic Red 46 (BR 46) dye used for acrylic fibers dyeing has been studied in a lab-scale continuous system with two different immobilized TiO(2) systems. Catalyst I was based on TiO(2) particles deposited on cellulose fibers; Catalyst II combined TiO(2) particles deposited on a layer of(More)
A series of seven activated carbons was obtained for use in drinking water treatments by steam-activation of olive-waste cakes. This raw material is an abundant and cheap waste byproduct of oil production, making these activated carbons economically feasible. The activated carbons, prepared by the one step method, were characterized, and the evolution of(More)
The purpose of this work was to study the synthesis of pillared interlayered clays from Moroccan stevensite called locally 'Ghassoul'. This clay has been intercalated with cetyltrimethylammonium surfactant (CTA-Stv) and aluminium hydroxypolycation (Al13-Stv). Characterization studies were performed using XRF, XRD, FTIR and DTA/TG analysis. Basal spacing(More)
  • 1