• Publications
  • Influence
Friction welding of TiNi alloy to stainless steel using Ni interlayer
Abstract Friction welding was carried out between TiNi alloy and austenitic stainless steel with and without a Ni interlayer. When TiNi alloy was welded to stainless steel without the Ni interlayer,Expand
  • 48
  • 1
A note on the superspace groups for one‐dimensionally modulated structures
A computer generation of all the non-equivalent superspace groups for one-dimensionally modulated structures has been performed. Comparison of this result with the previous list by de Wolff, JanssenExpand
  • 36
  • PDF
Adsorption isotherm of undissociated eluent acid and its relation to the retention of system peaks in non-suppressed ion chromatography
Abstract The formation of a system peak in non-suppressed ion chromatography is related to the adsorption of undissociated eluent acid onto the functionalized resin surface. To clarify the elutionExpand
  • 6
Enantiomeric purity determination by high-performance liquid chromatography with coupled polarized photometric/UV detection analysis of adulterative addition of synthetic malic and tartaric acids
A high-performance liquid chromatographic method for determining the enantiomeric purity of malic and tartaric acids with the combined use of UV and polarized photometric detectors in series has beenExpand
  • 6
Simultaneous Determination of Food Coal-Tar Dyes by Ion-Pair High Performance Liquid Chromatography
A method of isocratic high performance liquid chromatography (HPLC) using an ion-pair partition system was established for simultaneous determination of 11 food coal-tar dyes (FD: including Amaranth,Expand
  • 5
Determination of dieldrin in wool products by gas chromatography with microwave-assisted extraction.
Dieldrin is a moth-proofing agent that was banned by the Stockholm Convention in 2001. The amount of dieldrin in wool products was measured by a microwave-assisted extraction (MAE) method. TheExpand
  • 2
Microstructural Evolution in Friction Stir Welded 1050 Aluminum and 6061 Aluminum Alloy
The microstructure of friction stir welded 1050 aluminum and 6061 aluminum alloy was observed by a metallographic technique, transmission electron microscopy, electron backscatter diffraction patternExpand
  • 10
  • PDF
Which to choose for volumetry : MPRAGE or SPACE ?
Introduction: From a clinical viewpoint, T1-weighted images is used to evaluate lesion signal at pre& post-contrast enhancement. Especially in contrast-enhanced cases, T1-weighted 3D variable flipExpand
  • 1
  • PDF
Characteristics of diamond-like carbon film coated on pure aluminum
Abstract A hybrid process of pulsed plasma-based ion implantation and deposition using two kinds of hydrocarbon plasma C2H2 and C6H5CH3 was developed to produce diamond-like carbon (DLC) films,Expand
  • 1