• Publications
  • Influence
Silane functionalization of nanodiamond for polymer nanocomposites-effect of degree of silanization
Abstract The silanization of nanodiamond (ND) was successfully carried out by using the esterification reaction of hydrolyzed vinyltrimethoxysilane (VTS) in alcoholic solution. The surface carboxylicExpand
  • 41
  • 3
Thermal, mechanical and acoustic damping properties of flexible open‐cell polyurethane/multi‐walled carbon nanotube foams: effect of surface functionality of nanotubes
This article demonstrates the properties of open-cell flexible polyurethane foams incorporating multi-walled carbon nanotubes. Three different types of highly functionalized nanotubes havingExpand
  • 88
  • 3
Molecularly imprinted polydopamine nano-layer on the pore surface of porous particles for protein capture in HPLC column.
Bio-inspired Human Serum Albumin (HSA) imprinted polydopamine nano-layer was produced through oxidative polymerization of dopamine on the pore surface of HSA modified porous silica particles. TheExpand
  • 53
  • 2
Vulcanization kinetics and reversion behavior of natural rubber/styrene-butadiene rubber blend filled with nanodiamond – the role of sulfur curing system
Abstract The effect of nanodiamond (ND) particles on the network structure and vulcanization kinetics of natural rubber (NR)/styrene-butadiene rubber (SBR) blend vulcanized by three different curingExpand
  • 48
  • 2
Improvement of dry sliding tribological properties of polyamide 6 using diamond nanoparticles
Abstract In the present study, it was revealed that incorporation of nanodiamond containing carboxylic group (ND-COOH) decreased considerably specific wear rate (∼30%) and COF (∼60%) of polyamide 6Expand
  • 23
  • 2
Modeling and simulation approaches in the resin transfer molding process: A review
A review of current approaches in modeling and simulation of the resin transfer molding (RTM) process is presented. The processing technology of RTM is discussed and some available experimentalExpand
  • 67
  • 2
Effect of chemical treatment of Teflon powder on the properties of polyamide 66/Teflon composites prepared by melt mixing
AbstractThe surface defluorination of Teflon in powdery form was performed using a chemical treatment. The reaction parameters including the reaction time, sodium, naphthalene concentrations wereExpand
  • 11
  • 2
Rheological and mechanical characteristics of low density polyethylene/ethylene‐vinyl acetate/organoclay nanocomposites
Attempts were made to trace the effect of organoclay (OC) on the rheological and mechanical behaviors of the low density polyethylene (LDPE)/ethylene-vinyl acetate (EVA) blends. To do thisExpand
  • 34
  • 2
An Experimental Study of Saturated and Unsaturated Permeabilities in Resin Transfer Molding Based on Unidirectional Flow Measurements
Resin transfer molding (RTM) is a manufacturing process of composite parts that consists of injecting a fluid resin through a fibrous reinforcement. Permeability of the fiber bed is a key parameterExpand
  • 32
  • 2
Numerical simulation of three-dimensional flow and analysis of filling process in compression resin transfer moulding
In compression resin transfer moulding (CRTM), resin flows inside a mould filled with fibrous reinforcement as a result of resin injection and mould compression. This process facilitates the resinExpand
  • 51
  • 2