• Publications
  • Influence
World-Wide Benchmarking of ITER ${\rm Nb}_{3}{\rm Sn}$ Strand Test Facilities
The world-wide procurement of Nb3Sn and NbTi for the ITER superconducting magnet systems will involve eight to ten strand suppliers from six Domestic Agencies (DAs) on three continents. To ensureExpand
  • 28
  • 1
High strength, high conductivity Cu–Nb based conductors with nanoscaled microstructure
Abstract The features of corresponding manufacturing process for Cu–Nb microcomposite wires are presented. Investigation on the influence of the microstructure and crystallographic parameters onExpand
  • 29
  • 1
The Results of Russian ITER TF Conductor Sample Test in SULTAN
In the framework of the ITER Qualification Tests the Russian sample RFTF2 was tested in SULTAN facility. The sample is made of two identical ITER TF-type cable-in-conduit conductor sections. BronzeExpand
  • 8
  • 1
The study on the critical temperature, composition, and microstresses in a Nb
Abstract Monofilamentary Nb 3 Sn wires of large diameter with niobium tube, which were obtained by the method of solid-phase diffusion, are well suited for the study of the distribution of theExpand
  • 10
  • 1
High strength, high conductivity macro- and microcomposite winding wires for pulsed magnets
Abstract Two promising types of Cu/SS macrocomposite and Cu–Nb microcomposite winding wires for large-scaled high-field pulsed magnets are reviewed. The features of corresponding manufacturingExpand
  • 18
  • 1
The study on the I/sub c/(T, B) dependencies of Nb/sub 3/Sn strands for TF coil-insert of the ITER CS
The study on the critical current dependencies on magnetic field values in the range 3-12 T and on temperature in the range 4.2-15 K of Nb/sub 3/ Sn strands samples is presented. It is shown thatExpand
  • 5
  • 1
The investigation of production process features and properties of Nb/sub 3/Sn superconductors with extended internal tin sources
The main stages of the production of multifilamentary stabilized Nb/sub 3/Sn-base superconductors with extended tin sources and niobium filament size down to 1 mm are investigated. It is shown thatExpand
  • 6
  • 1
Design of new hollow superconducting NbTi cables for fast cycling synchrotron magnets
Two new options for a hollow NbTi superconducting cable were considered. The first one is based on keystoned wires wrapped around a copper-nickel tube 5 mm in diameter. The second one is a hollowExpand
  • 22
Stability Aspects of the High Strength High Conductivity Microcomposite Cu-Nb Wires Properties
Extremely high strength in microcomposite Cu-Nb wires is associated with ultra-fine-scale microstructure. The extended interfaces between ribbon-like niobium filaments and copper matrix contain theExpand
  • 13
Hysteresis electrical motors with bulk melt-textured YBCO
Abstract New types of electrical motors based on bulk high temperature superconductors (HTS) are presented. Theoretical and experimental research of these motors is described. Results for a series ofExpand
  • 27