• Publications
  • Influence
Analysis of parametric influence on delamination in high-speed drilling of carbon fiber reinforced plastic composites
In this paper, the effects of process parameters on delamination during high-speed drilling of carbon fiber reinforced plastic (CFRP) composite are presented. The damage caused at the entrance of theExpand
  • 272
  • 11
Drilling of fiber reinforced plastics: A review
Abstract The use of polymeric composite materials has increased considerably over the last decade and, as a consequence, the number of papers focused on relevant aspects concerning the machinabilityExpand
  • 392
  • 9
A novel approach based on digital image analysis to evaluate the delamination factor after drilling composite laminates
Abstract Fibre reinforced plastic (FRP) laminates are prone to delaminate when subjected to stresses concentration during machining operations, more specifically drilling. The aim of this work is toExpand
  • 306
  • 9
Delamination analysis in high speed drilling of carbon fiber reinforced plastics (CFRP) using artificial neural network model
Abstract The carbon fiber reinforced plastics (CFRP) are highly promising materials for the applications in aeronautical and aerospace industries. The delamination is a major problem associated withExpand
  • 229
  • 6
Hard turning: AISI 4340 high strength low alloy steel and AISI D2 cold work tool steel
Abstract The aim of this paper is to evaluate the machinability of hardened steels at different levels of hardness and using a range of cutting tool materials. More specifically, the work was focusedExpand
  • 213
  • 6
Turning of hardened 100Cr6 bearing steel with ceramic and PCBN cutting tools
Abstract This work deals with the machinability of hardened 100Cr6 bearing steel (62–64 HRC) when continuous dry turning using mixed alumina, whisker reinforced alumina and polycrystalline cubicExpand
  • 141
  • 6
  • PDF
State of the Art on Micromilling of Materials, a Review
The trend towards miniaturization has increased dramatically over the last decade, especially within the fields concerned with bioengineering, microelectronics, and aerospace. Micromilling is amongExpand
  • 130
  • 4
The surface integrity of turned and ground hardened bearing steel
The surface integrity of the machined component has received greater attention over the last 20 years, especially in relation to high performance materials. Due to the inherent differences betweenExpand
  • 139
  • 4
The effect of cutting tool geometry on thrust force and delamination when drilling glass fibre reinforced plastic composite
This work is focused on the investigation of the effect of the cutting tool geometry and material on the thrust force and delamination produced when drilling a glass fibre reinforced epoxy composite.Expand
  • 207
  • 2
Effects of high speed in the drilling of glass fibre reinforced plastic: Evaluation of the delamination factor
Abstract High speed machining (HSM) is an outstanding technology capable of improving productivity and lowering production costs in manufacturing companies. Drilling is probably the machining processExpand
  • 209
  • 2
...
1
2
3
4
5
...