• Publications
  • Influence
Polypyrrole/Silicon Carbide Nanocomposites with Tunable Electrical Conductivity
Conductive polypyrrole/SiC nanocomposites are fabricated via a facile oxidative polymerization approach using p-toluene sulfonic acid as a dopant and ammonium persulfate as an oxidant. The effects ofExpand
Effects of iron oxide nanoparticles on polyvinyl alcohol: interfacial layer and bulk nanocomposites thin film
Iron oxide (α-phase) nanoparticles with coercivity larger than 300 Oe have been fabricated at a mild temperature by an environmentally benign method. The economic sodium chloride has been found toExpand
Conductive Polypyrrole/Tungsten Oxide Metacomposites with Negative Permittivity
Polypyrrole (PPy) nanocomposites reinforced with tungsten oxide (WO3) nanoparticles (NPs) and nanorods (NRs) are fabricated by a surface-initiated polymerization method. The electrical conductivityExpand
Electrospun polyacrylonitrile nanocomposite fibers reinforced with Fe3O4 nanoparticles: Fabrication and property analysis
The manufacturing of pure polyacrylonitrile (PAN) fibers and magnetic PAN/Fe3O4 nanocomposite fibers is explored by an electrospinning process. A uniform, bead-free fiber production process isExpand
Carbon-stabilized iron nanoparticles for environmental remediation.
Ferromagnetic carbon-coated Fe nanoparticles fabricated at a mild temperature demonstrate a strong ability to effectively remove more than 95 wt% of Cr(VI) in waste water via carbon shell physical adsorption, which is much higher than the commercially available Fe NPs. Expand
Electrospun Polyimide Nanocomposite Fibers Reinforced with Core−Shell Fe-FeO Nanoparticles
Both pure polyimide (PI) and Fe-FeO nanoparticles reinforced PI nanocomposite fibers with a particle loading of 5, 10, 20, and 30 wt % are produced by electrospinning with optimized operationalExpand
Polyaniline-tungsten oxide metacomposites with tunable electronic properties
Polyaniline (PANI) nanocomposites reinforced with tungsten oxide (WO3) nanoparticles (NPs) and nanorods (NRs) are fabricated via a facile surface-initiated-polymerization (SIP) method. ScanningExpand
Electrospun Magnetic Fibrillar Polystyrene Nanocomposites Reinforced with Nickel Nanoparticles
The morphology and thermal stability of bead-free and uniform electrospun pure polystyrene (PS) and PS/Ni nanocomposite fibers are investigated by SEM and TGA/DSC. A higher thermal stability isExpand
Fabrication and characterization of electrodeposited antimony telluride crystalline nanowires and nanotubes
Arrays of nanowires and nanotubes of antimony-telluride (Sb2Te3) have been fabricated by an electrodeposition technique. Scanning electron microscopy was employed to characterize the morphology andExpand