• Publications
  • Influence
Microstructure and properties of Fe-based amorphous metallic coating produced by high velocity axial plasma spraying
An FeCrMoMnWBCSi amorphous metallic coating with thickness of about 1 mm and porosity less than 0.1% was deposited onto a mild steel by a high velocity axial plasma spraying. The microstructureExpand
Structural, Mechanical and Erosion Properties of Yttrium Oxide Coatings by Axial Suspension Plasma Spraying for Electronics Applications
Yttrium oxide (Y2O3) coatings have been prepared by axial suspension plasma spraying with fine powders. It is clarified that the coatings have high hardness, low porosity, high erosion resistanceExpand
Characterization of particle flows in an axial injection plasma torch
Radial injection of powders in traditional DC plasma torches induces powder classification as the larger particles tend to pass through the plasma while the smaller particles tend to bounce off. ThisExpand
Observations of nanocrystalline cubic boron nitride formed with plasma spraying
Abstract Cubic boron nitride (c-BN) has superior hardness and strength as compared to other ceramics that are commonly used as abrasives and in cutting tool applications. Cubic BN powders areExpand
Application of sol gel spin coated yttria-stabilized zirconia layers for the improvement of solid oxide fuel cell electrolytes produced by atmospheric plasma spraying
Due to its high thermal stability and purely oxide ionic conductivity, yttria-stabilized zirconia (YSZ) is the most commonly used electrolyte material for solid oxide fuel cells (SOFCs). StandardExpand
Plasma spray synthesis of ultra-fine YSZ powder
Abstract A plasma spray process has been developed for the mass production of nanopowders for solid oxide fuel cells (SOFCs) and significant technical developments have been achieved during the pastExpand
Crystal and micro structures of plasma sprayed yttrium oxide coatings by axial injection of fine powder slurries
Yttrium oxide (Y2O3) coatings have been prepared with high power axial injection plasma spraying using fine powder slurries. It is clarified that the coatings have high hardness, low porosity andExpand
Atmospheric plasma spraying has emerged as a cost-effective alternative to traditional sintering processes for solid oxide fuel cell (SOFC) manufacturing. However, the use of plasma spraying forExpand