• Publications
  • Influence
The effects of adding various ratios of zirconium oxide nanoparticles to poly(methyl methacrylate) on physical and mechanical properties.
TLDR
Although nano-ZrO2 addition had an adverse effect on some mechanical and physical properties of heat-cured PMMA, it increased hardness values, implying that the addition of nano- zirconium oxide would contribute positively to some mechanical properties of PMMA denture base material when nano- ZrO 2 was homogeneously distributed in PMMA. Expand
Effects of surface treatments on repair bond strength of a new CAD/CAM ZLS glass ceramic and two different types of CAD/CAM ceramics.
TLDR
Evaluated the effects of three different surface treatments and two different bonding procedures on shear bond strength of resin composites to different computer-aided design/manufacturing (CAD/CAM) ceramics with or without thermocycling found that higher bond strength values were observed with HF etching in Groups A and C compared with the other tested surface treatments. Expand
Repair bond strength of resin composite to bilayer dental ceramics
  • A. Ataol, G. Ergun
  • Materials Science, Medicine
  • The journal of advanced prosthodontics
  • 1 April 2018
TLDR
This study revealed that HF etching for glass Ceramics and sandblasting for zirconia ceramics were adequate for repair of all ceramic restorations. Expand
The effects of adding fluorescent carbon nanoparticles on various mechanical properties of denture liners.
The aim of this in vitro study was to evaluate the effects of incorporating fluorescent carbon nanoparticles (FCNs) on the hardness, tear, and tensile bond strength of an acrylic-based tissueExpand
An Interdisciplinary Approach for Hypoplastic Amelogenesis Imperfecta: A Case Report
TLDR
A 20 years old woman with a chief complaint of tooth discoloration, diastema, unsatisfactory esthetics and slight tooth sensitivity is referred to a clinic for full mouth rehabilitation of a patient with AI. Expand
Various Mechanical Properties of Denture Liners Combined with Zirconium Oxide Nanoparticles
Debonding from the denture base, poor resistance to tearing, and increase in hardness are some of the problems with denture liners. This research purposed to analyze the changes in mechanicalExpand