A. Elaya Perumal

  • Citations Per Year
Learn More
Copper thiocyanate (CuSCN) is introduced as a hole-injection/hole-transport layer (HIL/HTL) for solution-processed organic light-emitting diodes (OLEDs). The OLED devices reported here with CuSCN as HIL/HTL perform significantly better than equivalent devices fabricated with a PEDOT:PSS HIL/HTL, and solution-processed, phosphorescent, small-molecule, green(More)
Formamidinium lead halide (FAPbX3) has attracted greater attention and is more prominent recently in photovoltaic devices due to its broad absorption and higher thermal stability in comparison to more popular methylammonium lead halide MAPbX3. Herein, a simple and highly reproducible room temperature synthesis of device grade high quality formamidinium lead(More)
Hierarchical assembly of colloidal Sm2Co7/Co clusters in the form of nanospheres has been processed through a polyol process. The SmCo nanospheres are found to be robust, uniform ( 100 nm) and tend to self-assemble in the form of ordered superstructures. Each nanosphere consists of large number of discrete fine particles ( 6.0 nm), having two-phase(More)
Gears are used to transmit power and motion in mechanical, electrical and chemical process industries. Influenced by vibration, torque, temperature, lubrication & specific film thickness, the gear teeth contacts may experience change leading to unexpected failures such as wear, scuffing, pitting and micro-pitting on teeth surface. In order to avoid these(More)
The objective of this research is to study the dry sliding wear behaviour of metal surfaces and influences of their surface hardness. The improved hardness of the TiN deposited surface was about 1763 Hv. The worn surface Scanning Electron Microscope (SEM) morphology exhibits the surface damage due to varying wear test parameters. The Electron Dispersive(More)
Recently, CsPbBr3 perovskites have been emerging as very promising green emission materials for light-emitting diodes (LEDs) due to their high color purity, low cost and high photoluminescence quantum yield (PLQY). However, the corresponding LED performance is still low and far behind CH3NH3PbBr3; it is due to the lack of proper perovskite film preparation(More)
We report the structural and magnetic properties of the nanocrystalline Fe75Si15M10 (M-Al and Cr) powders prepared by mechanical alloying. The milling process produced a non-equilibrium solid solutions of bcc alpha-Fe(Si,Cr) and alpha-Fe(Si,Al). The average dislocation density increases and the average crystallite size decreases with increasing milling(More)
Mechanical gears are used to transmit power and motion in mechanical, electrical and chemical process industries. Influenced by vibration, torque, temperature, lubrication and specific film thickness, the gear teeth contacts may experience change leading to unexpected failures such as wear, scuffing, pitting and micro-pitting on teeth surface. In order to(More)
A multi smart robot should be able to analyze the situation faster and make appropriate decisions with minimal interference of the human in normal as well as in critical situations for performing various tasks. This is typically designed for the regions where there are high radiation emissions. The use of RFID tags makes the system work in the form of(More)
We present the results on highly anisotropic oriented face-centered-tetragonal ordered equiatomic FePt thin films embedded in a C matrix prepared by cosputtering technique on MgO ~100! substrates at 400 °C. We have found that doping of C in FePt alloy films is an effective and appropriate way to control the L10 ordering and growth of grain size down to 4(More)